Mechanics in 3D/4D probes.
Volume probes swing the transducer through a coupling fluid with a motor. Motor, gearing, seals and cap are wear parts. If oil escapes or bubbles form in the fluid, the volume image suffers — and the mechanics run harder.
How to spot it
An oil film on the housing, bubbles visible in the cap, cracks or porous spots in the cap, juddering or noisy running, initialisation errors when switching on. The volume image becomes streaky or breaks off at the same sweep position.
What we do
We replace the wear parts, refill with oil and renew the cap. If the mechanics themselves are worn out, they are renewed, including refurbishment of the element leads. 3D/4D probes have four repair levels with us; the highest is called Refurbished by MOONS.
Usual repair level
Every repair is individual and quoted on request — depending on the probe model and its condition. After the analysis you receive a transparent quotation. Additional services: disinfection to ISO standards, collection across Europe, 24h express service.
Probe types affected
- 3D/4D & matrix 3D/4D
Send in a probe with this fault
Five questions in the repair advisor, and at the end you get a completed enquiry form with an initial assessment.
Request a repairWhich manufacturers
This fault pattern occurs across all manufacturers. To the probes of yours: